MX-10 data logger is dedicated for real time logging and analyzing of data. Using 2G/4G network, logger
sends data to remote users / servers. Device has wide range of optional interfaces, protocols and can
read any kind of meters, controllers and sensors equipped with standard protocols. MX-10 Data Logger
can also act as a Modbus TCP/IP Converter, as it connects the capabilities of a data logger and M-Bus to
Modbus Converter in one product. Perfectly designed for monitoring and smart metering systems.
– Reading data from carrier meters and sensors (heat, water, gas, electricity…)
– Possibility to store accounting and measuring data in the device
– Ability to send data to FTP and MQTT servers
– Possibility to choose interfaces: Rs485, M-Bus, 2G/4G, USB, Ethernet
– An initial analysis of data could be performed
– Remote communication and updates through GSM/GPRS, LTE, Ethernet.
Description MX-10 data logger
CPU Cortex-M4
Flash archive storage 1-8 MB, battery backup, valid up to 5 years
Interfaces
2G Quad-Band 850/900/1800/1900 MHz
4G TDD-LTE B38/B40/B41
FDD-LTE B1/B3/B5/B7/B8/B20
WCDMA/HSDPA/HSPA+ B1/B5/B8
GSM/GPRS/EDGE 900/1800 MHz
RS485 up to 1.2 km, max 32 transivers, speed up to 19.2 Kbits/s
M-Bus up to 250 devices (375mA), short circuit protection
Ethernet 10/100 Mb twisted pair, up to 100m
USB ver. 2.0, type A
Protocols
Modbus RTU, Modbus TCP/IP, IP, FTP, MQTT, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:2000
General
Power supply 20-36V DC (25W)
Over-voltage protection >1000V
Power consumption <10VA
Interface galvanic isolation 500V
Physical characteristics
Dimensions 107x128x50 mm
Weight 300 g
Case fixing type DIN35
Protection type IP20
Climate conditions
Operating temperature -25 to +60oC
Storage temperature -40 to +60oC
Humidity range 5 – 95%, non-condensing
LED indication
Power
Serial port read/write for each port
Other features
Real time clock +
M-Bus auto setup +
Programming and updating Remotely: GSM/GPRS, LTE, Ethernet Locally: RS485, USB
Warranty period 2 years
