20W Single Output Industrial DIN Rail Power Supply
Original price was: €35.00.€28.00Current price is: €28.00.
ORDERING CODE:
• Power supply (5V)
• Power supply (12V)
• Power supply (15V)
• Power supply (24V)
| DC VOLTAGE |
5V ,12V ,15V ,24V |
|---|
Features:
• Universal AC input/Full range;
• Protections: Short circuit / Overload /
Over voltage;
• Cooling by free air convection;
• Can be installed on DIN rail TS-35/7.5
or 15;
• Built in DC OK active signal;
• LED indicator for power on;
• No load power consumption <0.75W;
• 100% full load burn-in test;
• 2-year warranty.
| OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V |
| RATED CURRENT | 3A | 1.67A | 1.34A | 1A | |
| CURRENT RANGE | 0 ~ 3A | 0 ~ 1.67A | 0 ~ 1.34A | 0 ~ 1A | |
| RATED POWER | 15W | 20W | 20W | 24W | |
| RIPPLE & NOISE (max)2 | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |
| VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 10.8 ~ 13.2V | 13.5 ~ 16.5V | 21.6 ~ 26.4V | |
| VOLTAGE TOLERANCE3 | ±2.0% | ±1.0% | ±1.0% | ±1.0% | |
| LINE REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| LOAD REGULATION | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| SETUP, RISETIME5 | 500ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load. | ||||
| HOLD UP TIME | 50ms/230VAC 20ms/115VAC at full load. | ||||
| INPUT | VOLTAGE RANGE | 85 ~ 264VAC 120 ~ 370VDC | |||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||
| EFFICIENCY (Typ.) | 76% | 80% | 81% | 84% | |
| AC CURRENT (Typ.) | 0.55A/115VAC 0.35A/230VAC | ||||
| INRUSH CURRENT
(Typ.) |
COLD START 20A/115VAC 40A/230VAC | ||||
| LEAKAGE CURRENT | <1mA / 240VAC | ||||
| PROTECTION | OVERLOAD | 105 ~ 160% rated output power | |||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed. | |||||
| OVER VOLTAGE | 5.75 ~ 6.75V | 13.8 ~ 16.2V | 17.25 ~ 20.25V | 27.6 ~ 32.4V | |
| Protection type: Shut down o/p voltage, re-power on to recover. | |||||
| FUNCTION | DC OK ACTIVE SIGNAL (max.) | 3.75 ~ 6V /
50mA |
9 ~ 13.5V /
40mA |
11.5 ~ 16.5V / 40mA | 18 ~ 27V /
20mA |
| ENVIRONMENT | WORKING TEMP. | -20 ~ +70℃ (Refer to “Derating Curve”). | |||
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing. | ||||
| STORAGE TEMP.,
HUMIDITY |
-40 ~ +85℃, 10 ~ 95% RH | ||||
| TEMP. COEFFICIENT | ±0.03%/℃ (0 ~ 50℃) | ||||
| VIBRATION | Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes;
Mounting: Compliance to IEC60068-2-6 |
||||
| SAFETY &
EMC |
SAFETY STANDARDS | UL508, TUV EN60950-1 approved. | |||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | ||||
| EMC EMISSION | Compliance to EN55011, EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2,-3 | ||||
| EMC IMMUNITY | Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024,EN61000-6- 1,EN61204-3, light industry level, criteria A | ||||
| OTHERS | MTBF | 236.9K hrs min. MIL-HDBK-217F (25℃) | |||
| DIMENSION | 22.5*90*100mm (W*H*D) | ||||
| PACKING | 0.17Kg; 72pcs/13.2Kg/0.91CUFT | ||||
| NOTE | 1. All parameters NOT specially mentioned are measures at 230VAC input, rated load and 25oC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using 12“ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set-up time. |
||||
